We often see fire curtain doors in public places such as shopping malls. As Ji'nan rolling shutters, it is necessary for us to make a description for you to learn to install fire curtain doors with a few simple steps.
1. According to the design model, we should consult the product instructions and electrical schematics first, and carefully check the surface treatment and zero accessories, and measure the basic dimensions of each part of the product. It is not suitable for the entrance size of the door, and the position and quantity of the embedded parts of the guide and support should be carefully checked.
2, we need to measure the elevation of the hole and carefully track the vertical line of the two guideway and the center line of the drum.
3, the cushion plate is welded on the embedded iron plate, and then the right and left support of the screw is used to carry out the drum installation. The correct reel installation should be flexible.
4, install decelerator, transmission system, electric chained street system, and debug the fire shutter door without load, then install the pre assembled curtain board on the drum.
5, the guide rail is installed according to the position of the drawing and welded into the body. The guide rail needs to be on the same vertical plane, then the water curtain spray system can be installed and connected to the general control system.
6, the fire curtain door debug operation, first use the hand to test run, and then the motor start and close several times, wait until all of the completion of the installation of the protective cover.
We have always been with the quality first, customer first, as our service tenet, our best efforts to provide you with satisfactory service, we sincerely welcome you to this company inspection, selection, hope that we have a good opportunity to cooperate to create a win-win situation together!