发布人：http://www.kdjlm.com 发布时间：2018-08-17 17:34:28
电动门操作端有三个按钮，卷帘门别离接着一根线，还有一条公共线，将开门按钮的这条线和公共线接到门禁操控器的继电器操控端的 NO和COM即可。这样就能够经过刷卡操控翻开主动门了。一般状况，电动门有三个功用按钮，即 开门，暂停，关门。门禁体系能完成的即是对 开门 功用的操控，而电动门的 暂停 和 关门 功用，则是由电动门自行操控的.大多数老类型的电动门中止和关门都是手动按钮操控的，新式的电动门有的预留了主动关门，主动防夹人夹车的规划，门翻开到位后检测到无障碍物能够主动关门。
There are three buttons at the operation end of the electric door. The rolling shutter door is separated from the next line, and there is a common line. Connect this line and the public line of the opening button to the NO and COM of the relay operation end of the access control device. This will enable you to open the active door by card control. In general, the electric door has three function buttons, that is, the door opens, pause and close. Most of the old types of electric doors stop and close by manual buttons. Some of the new electric doors have reserved active shutting, active anti-pinch car planning, door turning. After opening, no obstacle can be closed.
This function is attributed to the function of the initiative door, and the access control device can not be manipulated for the time being. Frequency on and off of the electric door button current and voltage will occur a greater disturbance, and may even cause a crash or restart, please under the telephone guidance of our skilled personnel, add a central relay or other isolation control circuit, so that the goods can operate safely for a long time.
Electric rolling shutter door in the transfer process, or in the use of the process, if the transfer, or improper use, very likely to occur the appearance of misalignment. Then it will cause the electric door dislocation or open, closed not smooth, that is, when the door is not seamed, this time should pay attention to prevent the above doubt, in the electric door shipment with two adhesive paper to fix the electric door, and then prevent the "electric door" in transit by external forces and the occurrence of "wrong teeth" appearance; In addition, a warning label is pasted on the top of the cabinet, prompting the user not to pull the electric door in a straight direction, nor to push the foot of the electric door causing uneven force, artificially forming a false tooth appearance. It is also possible to manually push the "electric door" in the direction of closing (with a little force) so that the gears are aligned and the "wrong tooth" appearance is corrected.
Electric coil gate is playing an endless role in the safety of the operating environment, and perhaps in the management of personnel attendance and other administrative operations. Today's electric door development skills will continue to improve, the future production skills will become more high-tech, and safety questions, will be the future of the electric door's primary development direction. To continuously improve the shortcomings of electric doors.
The above highlights come from: Jinan rolling shutter door more detailed highlights please click our official website: http://www.kdjlm.com