发布人：http://www.kdjlm.com 发布时间：2018-10-25 15:15:35
1. Electric rolling shutter should have the function of stopping in place during the process of opening and closing. It should not stop and continue to slide. If the sliding distance is more than 50 mm, the rolling shutter control device and the rolling door brake should be carefully checked and repaired immediately, and the shutter should run normally.
2. The upper end of the installation position of the rolling shutter door should have reliable fire protection facilities. A removable movable cover plate should be installed when the lower end of the rolling drum of the electric rolling shutter is used as a box or ceiling. A removable repair hole of 500 *500mm must be reserved at the lower end of the electric rolling shutter to facilitate maintenance.
3. Roll shutter door curtain and rust-prone parts, to carry out regular paint and anti-embroidery maintenance, prohibit heavy objects, hard objects impact the door.
4. Level the rolling shutter door curtain, align the upper and lower lines, the left pulley is the upper limit, the right is the lower limit, (according to the site needs to adjust themselves).
5. Installation of electric rolling curtain, must ensure that the rolling door and the wall into a whole, closure to do a good job, and then paint hole and wall. After painting, the door seam should be even and smooth, open the electric shutter door should be free and light, not too tight, loose and rebound phenomenon.
For more information about Jinan electric shutter door, please visit our website: http://www.kdjlm.com. There will be a lot of content for reference only.