咨询热线
当前位置: 首页 > 新闻媒体 > 公司动态 >

卷帘门的弹簧如何更换?

发布人:http://www.kdjlm.com    发布时间:2019-05-21 13:41:01

  卷帘门固然看起来简单,实践上卷帘门也是由很多局部组成的,比方卷帘门帘片、电机弹簧等。今天济南电动卷帘门厂家和大家一同来聊聊卷帘门的弹簧,弹簧关于卷帘门来说也是十分重要的,关于卷帘门的开合起着至关重要的作用。

  Although the rolling shutter door looks simple, in practice, the rolling shutter door is also made up of many parts, such as the rolling shutter curtain sheet, motor spring and so on. Today, Jinan Electric Curtain Door manufacturers and you come together to talk about the spring of the curtain door, spring is also very important for the curtain door, on the opening and closing of the curtain door plays a vital role.

  卷帘门同墙的作用一样起到程度分隔,它由帘板、座板、导轨、支座、卷轴、箱体、控制箱、卷门机、限位器、门楣、手动速放开关安装、按钮开关和保险安装等多个局部组成,普通装置在不便采用墙分隔的部位。下面由济南电动卷帘门厂家简述卷帘门弹簧的改换办法:

  The rolling shutter door acts as a partition to a certain extent as the wall does. It consists of curtain board, seat board, guide rail, support, reel, box body, control box, door winder, limiter, lintel, manual quick-release switch installation, button switch and insurance installation, etc. The common device is inconvenient to use wall partition. The following is a brief description of the method of changing the spring of the rolling shutter door by Jinan electric rolling shutter manufacturer:

  弹簧分为两种扭簧和钢璜,扭簧的装置办法是最为首先用手抓紧扭簧的簧壳面对人的方向(从正面)向上一定要抓紧、左手抓紧后然后右手把固定在门体上的螺丝用扳手(工具淞掉)卸下后两只手一同渐渐的把弹簧松到没有阻力为止、每个都是这样以此类推、然后把手动大梁两边的卷拄(大梁)螺丝卸下、然后取下来放到地上再把弹簧螺丝卸下,然后新的也照着拆下来的弹簧套上去后固定好螺丝当然了卷拄(大梁)也是依照老样子都装好后如今就是开端把弹簧收紧也是最关键的操作、(其实就是在先前拆下来时往反的方向)收紧到理想的阻力后把螺丝伤筋这样也就换好了。

20161216904517.jpg

  Spring is divided into two kinds of torsion spring and steel jar. The device of torsion spring is to first grasp the torsion spring shell by hand facing the human direction (from the front) upward, and then grasp the screw fixed on the door body with the left hand (tool shake off) and remove the screw with the right hand. After that, the two hands gradually loosen the spring until there is no resistance. Each hand is pushed in this way, and then the hand moves. Remove the winding screw on both sides of the girder, then take it off and put it on the ground, then remove the spring screw, and fix the screw after the new spring sleeve is removed. Of course, the winding (girder) is also installed according to the old style. Now it is the most critical operation to tighten the spring at the beginning. (In fact, it is in the opposite direction when it was previously removed) tighten to the ideal. After resistance, the screw tendons are replaced.

  总之呢,卷帘门弹簧的改换也并不是随意就能够完成的,特别假如平常在运用过程中,卷帘门的弹簧呈现问题,想要改换的话,倡议还是找正轨的济南电动卷帘门厂家,毕竟还是正轨的厂家比拟专业,改换过程中也不容易呈现问题。

  In a word, the change of the spring of the rolling shutter door is not optional, especially if the spring of the rolling shutter door presents problems in the normal operation process, if you want to change it, the proposal is to find the right track manufacturers of Jinan electric rolling shutter door, after all, the right track manufacturers are comparable professionals, and it is not easy to present problems in the process of changing.


上一篇:工业提升门和电动卷帘门的区别!
下一篇:卷帘门的芯和棍是怎么衔接的?
产品中心
联系我们

【本站图片均由网站所有方提供,部分图 片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!】