咨询热线
当前位置: 首页 > 新闻媒体 > 公司动态 >

安装车库门要掌握哪些专业术语?

发布人:http://www.kdjlm.com    发布时间:2019-08-22 10:19:38

  车库门在安装的时候,有一些条款,这些条款代表不同部分和安装方式,所以,如果你不掌握这些术语,然后处理的时候会感到在黑暗中,更不用说正确的安装,因此,正确安装,安装还需要掌握一些专业术语,然后简单地介绍它。

  When garage door is installed, there are some clauses. These clauses represent different parts and installation methods. So if you don't master these terms, you will feel in the dark when you deal with them, let alone install them correctly. Therefore, to install them correctly, you need to master some professional terms, and then simply introduce them.

  一般安装方式:指左右两侧各安装一根单轨即可正常工作的分段翻转门的安装方式,主要适用于楣高不小于600mm的开口。

  General installation method: refers to the installation of a single rail on both sides to work normally. It is mainly suitable for the opening of lintel height not less than 600 mm.

  高抬式:是指车库门通过导轨垂直向上运行一段,然后分段回转运动的一段向上安装车门的方式。

  Elevated type: refers to the way that the garage door runs up a section vertically through the guide rail, and then rotates up a section to install the door.

  顶部安装方式:垂直车库门安装方式,车库门全开上方安装扭力弹簧平衡系统。

  Top Installation: Vertical garage door installation, garage door open above the installation of torsion spring balance system.

  安装方式:垂直升降安装方式,扭转弹簧平衡系统位于全开门的中心位置。

  Installation: Vertical lifting installation, torsion spring balance system is located in the center of the full open door.

  重量(配重)平衡方式:垂直升降门安装方式,采用配重方式平衡门扇重量。

  Weight (counterweight) balance mode: vertical lifting door installation mode, using counterweight mode to balance the weight of the door.

  推拉式:通过导轨和驱动系统使门风机(单扇、双扇或多扇)向左右方向推拉式门安装方式。

  Push-pull type: Push-pull type door installation mode that makes the door blower (single, double or multiple) to the left and right direction through the guide rail and drive system.

  承重式:指车库门的自重由门顶导轨承重,以承受推拉式门的安装。

  Load-bearing type: refers to the garage door's self-weight from the top rail load-bearing, to withstand the installation of push-pull doors.

20161214750871.jpg

  承重式:指门的重量由下导轨承重,以承受推拉式门的安装。

  Load-bearing type: The weight of the finger door is borne by the lower guide rail to bear the installation of push-pull door.

  下承重电机随动:指安装在门上的下承重门随门移动的安装方式。

  Lower load-bearing motor servo: refers to the installation mode of the lower load-bearing door installed on the door moving with the door.

  全板工业门:是由全板门风机、扭力弹簧平衡系统和导向正消声器系统组合而成的高强度彩绘钢板,与卷帘门相比,一般门的面积和重量更大,安全要求更高。

  Full-plate industrial door: It is a high-strength painted steel plate composed of full-plate door fan, torsion spring balance system and guide positive muffler system. Compared with rolling shutter door, the area and weight of general door are larger, and the safety requirements are higher.

  如果及时掌握这些安装条件,所以我相信你当安装车库门会更容易,有两次结果一半的努力,因此,掌握外国技术,不仅是一个好方法的掌握不够或根据不同的产品,安装一些相关的知识。

  If you master these installation conditions in time, so I believe that it will be easier for you to install garage doors. There are two half efforts. Therefore, mastering foreign technology is not only a good way to master insufficient or install some relevant knowledge according to different products.


上一篇:工业快速门配置应该遵循什么原则?
下一篇:最后一页
产品中心
联系我们

【本站图片均由网站所有方提供,部分图 片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!】