咨询热线
当前位置: 首页 > 新闻中心 > 公司动态 >

卷帘门电机控制器功率远大于电机功率!

发布人:http://www.kdjlm.com    发布时间:2019-11-05 16:15:05

  卷帘门电机控制器的功率远远大于电机的功率,所以满了电机就会过载,控制器不知道是否要控制几乎到线。

  The power of the shutter motor controller is far greater than that of the motor, so the motor will be overloaded when it is full. The controller does not know whether to control almost to the line.

  卷帘门厂家控制系统,卷帘门,配套辅料,更重要的是安装过程!

  Rolling door manufacturer control system, rolling door, supporting accessories, more importantly, the installation process!

  最重要的是控制系统,即电动机和遥控器或开关部分,由于使用频率和使用环境的要求不同,对使用寿命、噪声、控制有不同的强调,所以,控制系统总是要!

  The most important is the control system, that is, the motor and the remote control or the switch part. Due to the different requirements of the use frequency and the use environment, there are different emphasis on the service life, noise and control. Therefore, the control system is always necessary!

  帘片的性能也很重要,市场上主要出现的卷帘材料采用有铝合金(保温聚氨酯发泡)、镀锌钢带(也有发泡)、铝型材(空心);料带厚度在0.2-0.8mm之间。表面处理包括烤漆、镀锌、环氧树脂背漆、氟碳等。泡沫材料基本上是不含氟的聚氨酯。卷帘门的材料直接影响卷帘门的性能、绝缘性能、耐候性和强度。

  The performance of the curtain is also very important. The main rolling materials in the market are aluminum alloy (thermal insulation polyurethane foam), galvanized steel strip (also foam), aluminum profile (hollow); the thickness of the material strip is between 0.2-0.8mm. Surface treatment includes baking paint, galvanizing, epoxy resin back paint, fluorocarbon, etc. Foam materials are basically fluorinated polyurethanes. The material of roller shutter directly affects the performance, insulation, weather resistance and strength of roller shutter.

  卷帘门电机控制器的输出电压不总是固定的,或者随着电机转速的增大而增大。

  The output voltage of the shutter motor controller is not always fixed or increases with the increase of motor speed.

  卷帘门电机控制器不根据电机厅开关速度信号和旋转角度信号控制电机转矩。

  The rolling shutter motor controller does not control the motor torque according to the switch speed signal and rotation angle signal of the motor Hall.

  依次关闭卷帘门,在卷帘门完全关闭后再关闭另一扇卷帘门。

  Close the rolling shutter door in turn, and then close another rolling shutter door after the rolling shutter door is completely closed.

20161214750871.jpg

  关闭卷帘门时,要观察下部是否有杂物,及时有杂物清理。

  When closing the roller shutter door, observe whether there are sundries at the lower part and clean them in time.

  慢转或无转

  Slow or no rotation

  主要原因是电机烧坏、电路短路、负载过重或停止按钮未复位。

  The main reason is that the motor is burnt out, the circuit is short circuited, the load is too heavy or the stop button is not reset.

  然后解决这个故障更换烧毁电机,检查路线开启时,搅拌的滑块限位开关接触开关触点,调整开关位置,检查是否有任何机械部件卡住了,如果有任何需要消除。

  Then solve the problem and replace the burned motor. Check that when the line is opened, the limit switch of the mixing slider contacts the switch contact, adjust the switch position, and check whether any mechanical parts are stuck, and if any need to be eliminated.

  应站在离卷帘门一步远的地方,在关门过程中,钥匙不要拉出门锁,如有异常声音或异常动作,及时向团队汇报。

  Stand one step away from the roller shutter door. Do not pull the key out of the door lock during the closing process. If there is any abnormal sound or action, report to the team in time.


上一篇:车间是否要必要安装快速卷帘门?
下一篇:如何有效增加卷帘门的使用寿命?
产品中心
联系我们