咨询热线
当前位置: 首页 > 新闻媒体 > 公司动态 >

常用的工业门维修技巧有什么?

发布人:http://www.kdjlm.com    发布时间:2020-01-09 16:06:07

  工业门作为一种常见的日常生产厂家和车间专业使用的门,在我们的生活中一直扮演着不可或缺的角色。工业门设计主要分为:手拉,电气,自动几种,工业门每天接触的人都知道,工业用门虽然很方便,但容易损坏,这涉及到维修的问题,下面将介绍关于工业门维修技能每个人,一起看看:

  Industrial door, as a common door used by daily manufacturers and workshops, has always played an indispensable role in our life. Industrial door design is mainly divided into: hand pull, electrical, automatic. People who touch industrial door every day know that although industrial door is very convenient, it is easy to damage, which involves maintenance problems. Next, I will introduce the maintenance skills of industrial door for everyone, let's look at it together:

  常用的工业门维护技术有哪些?

  What are the commonly used maintenance technologies for industrial doors?

  1. 工业用门维护。我们需要检查一下门的线条是否有问题,不能没有检测就直接开始维修,否则有很大的隐患。

  1. Industrial door maintenance. We need to check the line of the door to see if there is any problem. We can't start the maintenance without testing, otherwise there is a big hidden danger.

  2. 在开、关、停过程中,工业门的维护应具有位置停车功能,不应停止,应继续滑动。当滑动距离大于50mm时,应立即检查并修理工业门控电器及卷帘门制动器,使其正常运行。

  2. In the process of opening, closing and stopping, the maintenance of the industrial door shall have the function of position stopping, which shall not stop but continue to slide. When the sliding distance is more than 50 mm, the industrial door controller and roller shutter brake shall be checked and repaired immediately to make them operate normally.

  3.重要组成的工业门的门框,铁皮,滚动组成、铁皮是通过心轴铰链式连接,中央大的芯棒两端较小,可以组装,一端铰链式连接的铁皮连接边缘锯齿状的凹凸。

  3. The door frame, iron sheet, rolling composition and iron sheet of the important industrial door are connected through the spindle hinge. The two ends of the central large mandrel are smaller and can be assembled. The iron sheet connected by the hinge at one end is connected with the zigzag concave convex edge.

  其中凸部为凸耳状,两端有透心轴孔。每个薄片的凹凸部分嵌套在一起,通过芯棒串联。

  The convex part is in the shape of lug, and the two ends have through spindle holes. The concave and convex parts of each sheet are nested together and connected in series by a mandrel.

20161214807515.jpg

  工业门修理时,要彻底清洗这些孔,然后检查是否有损坏,不管以后有没有问题,都要彻底擦洗。这也是为了防止后期工业门性能下降,寿命降低。

  When repairing industrial doors, these holes should be cleaned thoroughly, and then checked to see if there is any damage. No matter if there is any problem in the future, they should be thoroughly scrubbed. This is also to prevent the performance and service life of industrial doors from declining in the later stage.

  4. 用于工业门维修的底梁座的上限值必须与轴承架下端保持200毫米以上的距离,以保证在制动停止时不发生顶升现象。

  4. The upper limit value of the bottom beam seat used for industrial door maintenance must be kept more than 200 mm away from the lower end of the bearing frame to ensure that there is no jacking phenomenon when the brake stops.

  5. 工业门保养时应注意门帘与卷帘机严禁接触酸性、碱性溶液,以防止门帘表面腐蚀。

  5. During the maintenance of industrial doors, it shall be noted that the curtain and rolling machine shall not contact with acid and alkaline solution to prevent the surface corrosion of the curtain.

  6. 根据建筑物的不同特点,一般选用内、外、内三种不同的安装方式,根据不同的工业门要注意装卸时的有关规定,不能凭感觉。

  6. According to the different characteristics of the building, three different installation methods are generally selected, i.e. internal, external and internal. According to different industrial doors, attention should be paid to the relevant regulations when loading and unloading, not by feeling.

  工业门维护不仅通常需要维护,在损坏维修时需要注意的问题也很多。工业门的保养不能为了降低成本而忽视,否则会得不偿失。如果您有意向订购,欢迎在本网站了解。

  Industrial door maintenance not only usually needs to be maintained, but also needs to pay attention to many problems when it is damaged. The maintenance of industrial doors should not be ignored in order to reduce the cost, otherwise it will not pay off. If you are interested in ordering, please check this website.


上一篇:制作车库门用什么材料好?
下一篇:最后一页
产品中心
联系我们

【本站图片均由网站所有方提供,部分图 片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!】