咨询热线
当前位置: 首页 > 新闻中心 > 公司动态 >

浅谈防止卷帘门生锈或腐蚀的办法

发布人:http://www.kdjlm.com    发布时间:2021-05-10 15:34:23

电动卷帘门操作简略,运用方便,被视为高科技产品,因此许多运用者会忽视对电动卷帘门的安 全性的注重,这就产生了安 全危险的存在。
Electric roller shutter door is easy to operate and is regarded as a high-tech product, so many users will ignore the safety of electric roller shutter door, which leads to the existence of safety risk.
所以在实践的操作中,仍是要注意些电动卷帘门的运用与保护事项。电动卷帘门是卷帘门的一种,选用电力驱动,简便灵敏。多用于库房,门店等。
So in the practice of operation, we still need to pay attention to the use and protection of some electric roller shutter doors. Electric rolling shutter door is a kind of rolling shutter door, which is driven by electric power, simple and sensitive. Mostly used in warehouse, store, etc.
1、当卷帘门拉下知道极限长度的时分跟地上距离不应该大于50mm。
1. When the rolling shutter door is pulled down to know the limit length, the distance to the ground should not be greater than 50 mm.
济南卷帘门
2、卷帘门金属部位要留心保护和维护,防止有生锈或许腐蚀现象呈现。
2. The metal parts of the rolling shutter door should be carefully protected and maintained to prevent rust or corrosion.
3、卷帘门设备方位上方有必要具有防火设备,下端安排包箱或许吊顶时有必要设置活动拆式活动盖板,下端有必要预留500mm边长的可拆卸修孔,便于修补维护。
3. It is necessary to have fire protection equipment at the top of rolling shutter equipment, to arrange box at the lower end, or to set removable movable cover plate when ceiling, and to reserve 500mm side length removable repair hole at the lower end for repair and maintenance.
4、卷帘门底梁座上限方位有必要跟轴承少200mm距离,保证制动中止时不发生冲顶的现象。
4. It is necessary to keep a distance of 200 mm away from the bearing at the upper limit of the bottom beam seat of the rolling shutter door, so as to ensure that the phenomenon of top rush does not occur when the braking is stopped.
5、在卷帘门运用前先检查理解其工作方向,长度极限以及门洞高度的方位,也不要轻易损坏限位器,防止构成反卷冲顶等丢掉。
5. Check and understand the working direction, length limit and door opening height before using the rolling shutter door, and do not easily damage the limiter to prevent it from being thrown away.
6、卷帘门工作时如果呈现较大颤抖或许是反常动静时建议当即停机检查,并且检查是不是有阻挠工作的杂物。
6. When the rolling shutter door works, if there is a big shaking or abnormal movement, it is recommended to stop the machine immediately for inspection, and check whether there are obstructing debris.
7、建议每年对卷门机进行3次检查,及时上油保证工作质量。
7. It is suggested that the door rolling machine should be inspected three times a year to ensure the quality of work.
8、卷帘门操作的时分,操作者有必要站在卷门工作情况方位进行操作,防止发生意外损害。
8. During the operation of rolling door, it is necessary for the operator to stand in the working position of rolling door to prevent accidental damage.
以上就是济南卷帘门厂小编给大家分享的关于防止卷帘门生锈或腐蚀的办法,希望能对大家起到帮助。
The above is Jinan rolling shutter door factory Xiaobian to share with you about the prevention of rolling shutter door rust or corrosion methods, hope to help you.
上一篇:济南翻板车库门的安装注意三点
下一篇:车库门定期保养需注意6点事项
产品中心
联系我们