咨询热线
当前位置: 首页 > 新闻中心 > 公司动态 >

济南彩钢卷帘门质量控制六要素

发布人:http://www.kdjlm.com    发布时间:2021-07-16 15:00:53

一、对要素的描述
1、 Description of elements
济南彩钢卷帘门生产前过程控制
Pre production process control of Jinan color steel rolling shutter door
针对产品实现的全过程,包括技术洽谈,技术确认,技术输出,采购验证,生产加工,过程检验,安装报验等过程,通过过程控制,以保证产品和服务质量。
Aiming at the whole process of product realization, including technical negotiation, technical confirmation, technical output, procurement verification, production and processing, process inspection, installation and inspection, through process control, to ensure the quality of products and services.
二、检验和试验
2、 Inspection and test
为保证终产品的质量,采取正确的检验方法,适当的检验工具,以及配备适合的检验人员,对原材料,工序,安装等过程进行检验,为产品终合格提供证据。
In order to ensure the quality of the final product, take the correct inspection method, appropriate inspection tools, and equipped with suitable inspection personnel to inspect the raw materials, processes, installation and other processes, so as to provide evidence for the final product.
三、终检验和试验
3、 Final inspection and test
按照厂内要求,进行终的产品检验,按照甲方要求,进行产品安装后报验。通过终检验,为工程提供合格的产品
Carry out final product inspection according to the requirements of the factory, and apply for inspection after product installation according to the requirements of Party A. Provide qualified products for the project through final inspection
四、检验和试验状态
4、 Inspection and test status
在产品加工,完成安装各个过程按照规定采用适当的标识,确保所有合格的产品方能进入下道工序。
In the process of product processing and installation, appropriate identification shall be adopted according to regulations to ensure that all qualified products can enter the next process.
五、不合格品的控制
5、 Control of unqualified products
对于过程控制中出现的不合格品,及时采取状态标识进行隔离,并按照程序采用返工,返修,降级使用或报废等方法进行不合格的处置,对于处置后的不合格品重新进行检验和试验,合格后方可进入下道工序
For the unqualified products in the process control, timely adopt the status identification for isolation, and according to the procedures, adopt the methods of rework, repair, degradation or scrap to deal with the unqualified products. For the unqualified products after disposal, conduct the re inspection and test, and enter the next process only after they are qualified
六、纠正和预防腐剂措施
6、 Corrective and preventive measures
对于济南彩钢卷帘门出现的不合格,应及时采取纠正措施进行整改,同时根据情况进行分析,制定预防腐剂措施,防止不合格的再次出现。
For the disqualification of Jinan color steel rolling shutter door, corrective measures should be taken in time for rectification. At the same time, according to the situation, preventive measures should be formulated to prevent the recurrence of disqualification.
上一篇:车库门的选择是非常重要的!
下一篇:济南车库门厂家未来要从这个方向来发展
产品中心
联系我们