咨询热线
当前位置: 首页 > 新闻中心 > 公司动态 >

自动车库门门体材料及五金配件

发布人:http://www.kdjlm.com    发布时间:2021-07-28 14:55:42

1、导轨:采用1.5㎜厚镀锌钢板,一次成形。
1. Guide rail: 1.5mm thick galvanized steel plate is used for one-time forming.
2、边铰链:采用1.5mm钢板制成,兰白镀锌(去油除渍,酸洗磷化处理,再镀锌)处理。
2. Side hinge: made of 1.5mm steel plate and treated with blue white galvanizing (degreasing, pickling, phosphating and then galvanizing).
3、滚轮:滚轮内采用进口轴承密封处理,外层用白色尼龙压铸而成。高度耐磨损,抗老化,使用寿命长。
3. Roller: the roller is sealed with imported bearing, and the outer layer is made of white nylon die-casting. It has high wear resistance, anti-aging and long service life.
4、弹簧:采用70#扭拉力,表面电泳防锈处理。
4. Spring: it adopts 70# torsional tension, and its surface is electrophoretic and rust proof.
5、密封条:门扇下端及轨道与墙体连接处设有密封胶条,高度耐老化,环保,抗寒冷,长期使用不变形,能有效地抵御风沙、雨水的侵蚀。
5. Sealing strip: sealing strip is set at the lower end of the door leaf and the connection between the track and the wall, which is highly anti-aging, environmental protection, cold resistance, no deformation after long-term use, and can effectively resist the erosion of wind, sand and rain.
6、其余五金件采用优良冷轧钢板精制而成,热镀锌或兰白镀锌,表面烤漆(二涂二烤)。
6. Other hardware parts are refined from excellent cold-rolled steel plate, hot-dip galvanized or blue white galvanized, and the surface is painted (two coating and two baking).
门板材料:
Door panel material:
1、门板为双层复合型板,总厚度为40mm,高度约为500mm。板材厚度为0.326mm。门侧采用2.0mm镀锌钢板密封包边,外观为方格款式。
1. The door panel is a double-layer composite panel, with a total thickness of 40mm and a height of about 500mm. The plate thickness is 0.326mm. The door side is sealed and wrapped with 2.0mm galvanized steel plate, and the appearance is square style.
2、彩钢板先经双面热镀锌处理:冷轧钢板连续热镀锌处理后,双面标准镀锌附着量为275/m以上。
2. Color steel plate shall be subject to double-sided hot galvanizing treatment first: after continuous hot galvanizing treatment of cold-rolled steel plate, the adhesion of double-sided standard galvanizing is more than 275 / m.
3、门板内填充高密度聚氨酯发泡材料。金属板与聚酯发泡材料结合紧密,保温层无孔洞,形成整体,金属板与保温层保证10年以上不分离。门体能抗风压42m/秒(12级);
3. The door panel is filled with high-density polyurethane foam material. The metal plate is closely combined with polyester foam material, and the insulation layer has no holes to form a whole. The metal plate and insulation layer shall not be separated for more than 10 years. The door can resist wind pressure of 42m / S (Level 12);
4、门体表面压方框,同时表面进行压橘皮纹处理,具有浮雕效果。
4. The surface of the door body is pressed with a box, and the surface is pressed with orange peel, which has the effect of relief.
上一篇:济南车库门厂家未来要从这个方向来发展
下一篇:安装车库卷帘门有多重要?
产品中心
联系我们