咨询热线
当前位置: 首页 > 新闻中心 > 行业新闻 >

电动卷闸门维修保养方法

发布人:http://www.kdjlm.com    发布时间:2017-12-21 18:32:56

1、 卷闸门安装位置的上端应有可靠的防火设施,在卷闸门的卷筒下端做包箱或吊顶时必须设置可拆式活动盖板,在电动卷门机一侧下端必须预留500×500mm可拆检修孔,以便于维修保养。
1, there should be a reliable fire protection facilities at the upper end of the location of the rolling gate. When the lower part of the rolling door is at the bottom of the rolling drum, a detachable movable cover must be set up. At the lower end of the electric rolling door machine, a 500 * 500mm detachable maintenance hole must be reserved for maintenance.
2、所有电动控制的卷闸门,启闭运行方向必须与开关箱指示相同,特别是在新接通电源试车或外来输入电源变换相线时,应先使用手动装置将门帘置于门洞高度1/2 的位置,接通电源后试操作卷门启闭,直到与指示相附,方可正常使用,否则损坏限位器,引起卷帘反卷或冲顶等而造成损失。

济南电动卷帘门

2, all electric control gate, opening and closing operation direction and switch box instructions must be the same, especially in the new power test or foreign input power transformation phase, should be placed on the door curtain 1/2 height position using a manual device, connected to power test opening and closing operation door, and until the instructions attached otherwise, it can be used normally, the damage caused by anti rolling limit device, roll or top caused loss.
3、 电动卷闸门操作时,操作者必须站在能看到卷门运行状态的位置进行操作,否则易发生意外而受损。
3. When the electric coil gate is operated, the operator must stand in the position that can see the running state of the roll door. Otherwise, the operator is prone to accident and damage.
4、卷闸门门帘和卷门机禁止与酸、碱性物溶液接触,以防腐蚀门帘表面。
4, the rolling gate door curtain and the roll door machine are forbidden to contact with the acid and alkaline solution to prevent the surface of the corrosion door curtain.
5、卷门机在运行、滑行、传动等部位应定期检查(至少每年2次),并根据需要及时加油,以保证卷闸门的正常使用。
5, rolling door machines should be checked regularly (at least 2 times a year) in operation, sliding and transmission parts, and timely refueling according to need, so as to ensure normal use of rolling gates.
6、电动卷闸门在启闭停止过程中,应具备随位停止之功能,不应有停止而继续下滑现象,如发生下滑距离大于50mm的情况出现,应立即对卷闸门控制电器和卷门机制动器进行仔细检查修理,运行正常为止。
6, electric gate in the opening and closing stop process, should have with the stop function, should not stop and continue to decline, such as the occurrence of sliding distance of more than 50mm, should be immediately to gate control and electric door brake check repair, normal operation.
以上介绍希望对您有所帮助,我们的产品质量好,价格合理,真诚欢迎大家来选购,我们竭诚为您服务。
The above introduction hopes to help you, our product quality is good, the price is reasonable, we sincerely welcome everyone to choose and purchase, we will serve you wholeheartedly.

上一篇:车库门停止运行的解决方法
下一篇:卷帘门安装步骤方法的小知识
产品中心
联系我们