咨询热线
当前位置: 首页 > 新闻媒体 > 行业新闻 >

防火门监控系统的设计原理是怎么样的?

发布人:http://www.kdjlm.com    发布时间:2019-04-30 14:11:37

防火门搭配监控系统,已成成为众多消费者的默认选择,因为监控系统的存在,防火门的性能更加完善,发挥作用也会更加及时。下面济南防火门厂家就防火门监控系统的设计为大家简单介绍一下。

  Fire door collocation monitoring system has become the default choice of many consumers, because of the existence of the monitoring system, the performance of fire door is more perfect, and it will play a more timely role. The following Jinan fire door manufacturers on the design of fire door monitoring system for you a brief introduction.

  防火门监控系统由防火门监控器、监控分机、监控模块以及电动闭门器、电磁释放器、门磁开关等组成,主要完成以下功能:

  Fire door monitoring system consists of fire door monitor, monitoring extension, monitoring module, electric door closer, electromagnetic releaser, door magnetic switch and so on. It mainly completes the following functions:

  ①实时监测电动防火门的开启、关闭、故障状态,并实时上传相关信息至火灾报警主机;

  ①Real-time monitoring of electric fire door opening, closing and failure status, and real-time uploading of relevant information to the fire alarm host

  ②平时状态,人流量大通道防火门处于常开状态,方便人员通行;

  (2) In peacetime, the fire doors of large passages with large traffic volume are usually open to facilitate the passage of people;

  ③一旦防火门处于故障状态,系统预警直至故障消除;

  Once the fire door is in a state of failure, the system warns until the failure is eliminated.

  ④火警情况下,与火灾自动报警联动,联动关闭常开防火门,切换至隔烟阻火的疏散状态。

20161219618477.jpg

  (4) In case of fire alarm, it is linked with automatic fire alarm to close the fire door and switch to the evacuation state of smoke-proof and fire-proof.

  系统各模块具体功能如下:

  The specific functions of each module of the system are as follows:

  ①防火门监控器:用于显示并控制防火门打开、关闭状态。

  Fire door monitor: used to display and control the opening and closing status of fire door.

  ②防火门监控分机:用于给监控模块供电和信息传输。

  (2) Fire door monitoring extension: used for power supply and information transmission to the monitoring module.

  ③常开防火门监控模块和电动闭门器:保持常开防火门的打开状态、接收关闭指令时平稳关门,并能将状态信息反馈至防火门监控器。

  (3) Normally open fire door monitoring module and electric door closer: keep the open state of normally open fire door, close the door smoothly when receiving closing instructions, and feedback the status information to the fire door monitor.

  ④常闭防火门监控模块和门磁开关:监视常闭防火门的开关状态,并能将状态信息反馈至防火门监控器。

  (4) Normally closed fire door monitoring module and magnetic switch: Monitor the switch status of normally closed fire door, and feedback the state information to the fire door monitor.

  以上内容便是济南防火门厂家为大家讲述的防火门监控系统的设计,大家可以简单了解一下,对于大家操作电动防火卷帘门及其监控系统都是很有帮助的。

  The above content is the design of fire door monitoring system described by Jinan fire door manufacturer. You can have a brief understanding of it. It is very helpful for you to operate electric fire door and its monitoring system.


上一篇:防火卷帘门的国际竞争力!
下一篇:如何给你经常出现问题的车库门升级?
产品中心
联系我们

【本站图片均由网站所有方提供,部分图 片来源于网络,如有任何疑问请第一时间与我们联系,未经沟通本站不承担相关法律责任!】