咨询热线
当前位置: 首页 > 新闻媒体 > 行业新闻 >

如何安装高效的快速卷帘门?

发布人:http://www.kdjlm.com    发布时间:2020-04-02 14:46:33

  快百叶窗基本上是马达提供动态性能,作为控制系统的电气箱,门阴影,透明窗口组成,其质量除了反映在每个组件自己的质量外,也反映出在安装,安装质量高,操作可以更长,更光滑,使用过程可以避免很多不必要的麻烦。快速卷帘门的使用和控制主要分为:1、按钮式、2、拉绳式、3、遥控式、4、自动地磁式、5、雷达式、6、光电式、7、联锁式、8、感应式。下面就为大家介绍一下如何安装高效的快速卷帘门?

  The fast shutter is basically composed of the electric box, door shadow and transparent window of the control system. Its quality is reflected not only in the quality of each component, but also in the installation. The installation quality is high, the operation can be longer and smoother, and the use process can avoid many unnecessary troubles. The use and control of the fast rolling shutter door are mainly divided into: 1. Button type, 2. Pull rope type, 3. Remote control type, 4. Automatic geomagnetic type, 5. Radar type, 6. Photoelectric type, 7. Interlocking type, 8. Inductive type. Let's introduce how to install the most efficient fast shutter door?

  1. 安装前,安装人员必须熟悉快速门的安装图纸,检查布线是否到位,并做好其他安装准备工作,包括所需的零件和工具。

  1. Before installation, the installation personnel must be familiar with the installation drawing of the quick door, check whether the wiring is in place, and make other installation preparations, including the required parts and tools.

  2. 安装前应检查门的尺寸是否与孔的尺寸一致;导架数量是否正确;孔内预埋件、支架预埋件位置正确等。

  2. Before installation, check whether the size of the door is consistent with the size of the hole; whether the number of guide frame is correct; whether the position of embedded parts in the hole and support embedded parts is correct, etc.

20161216904517.jpg

  3、工艺大致可分为:孔处理、弹性丝、固定滚筒传动装置、空载试验、帘板、导轨安装、试验、清洗。

  3. The process can be roughly divided into: hole treatment, elastic wire, fixed roller drive device, no-load test, curtain plate, guide rail installation, test and cleaning.

  4. 孔处理:检查孔与产品尺寸是否一致。一般情况下,孔的宽度和高度不应大于5米。

  4. Hole treatment: check whether the hole is consistent with the product size. Generally, the width and height of the hole shall not be more than 5m.

  5. 弹性线:测量孔的标高,弹出两根垂直导轨和鼓的中心线。

  5. Elastic line: measure the elevation of the hole, and pop out the center lines of two vertical guide rails and drums.

  6、固定转鼓、传动装置:将垫板电焊在埋入的铁板上,用螺丝固定在转鼓支架周围,安装转鼓后,应将转动灵活的转鼓安装好,安装减速器和传动系统,安装电气控制系统。

  6. Fix the drum and transmission device: weld the base plate on the embedded iron plate, and fix it around the drum bracket with screws. After installing the drum, install the flexible drum, install the reducer and transmission system, and install the electrical control system.

  以上内容由济南卷帘门厂家整理发布,更多相关信息可以点击官网进行咨询:http://www.kdjlm.com

  The above content is organized and released by Jinan roller shutter manufacturer. For more information, please click the official website for consultation: http://www.kdjlm.com


上一篇:车库门固定式扭簧接头工艺流程!
下一篇:卷帘门门扇颤抖与门扇开关速度慢的原因!
产品中心
联系我们