咨询热线
-->
当前位置: 首页 > 新闻中心 > 行业新闻 >

济南车库门遥控钥匙丢失的处理方法

发布人:http://www.kdjlm.com    发布时间:2020-08-03 14:45:10

相信不少济南车库门的用户有过遥控钥匙丢失的情况,备用的钥匙却不多,遇到这种情况我们应该如何对待呢?    
I believe that many Jinan garage door users have lost the remote key, but there are not many spare keys. How should we deal with this situation?
首先当然是要重新配,但是在那里配,这也是一个要注意的问题。
First of all, of course, it is necessary to re match them, but it is also a problem to pay attention to when matching there.
联系厂家重新配车库门的钥匙是最安全的办法,但是效率相对比较慢。同时还可复制车库门遥控器,自改码,删除丢失遥控器,消除安全隐患,但是部分用户担心遥控器的频率问题,一直坚持要换频率,可参照以下办法:
Contacting the manufacturer to replace the key of garage door is the safest way, but the efficiency is relatively slow. At the same time, it can also copy the remote control of garage door, change the code by itself, delete the lost remote control, and eliminate the potential safety hazard. However, some users are worried about the frequency of the remote control and insist on changing the frequency. Please refer to the following methods:
(1).清除遥控器的地址码
(1) . clear the address code of the remote control
同时按住遥控器上方的两个B C按键,这时LED闪亮一下后熄灭约2秒后LED快闪,这表明原来的地址码已经清除了,这时短按所有按键LED都闪亮一下后熄灭。
At the same time, press and hold the two B C buttons on the top of the remote control, then the LED flashes once and then goes out. About 2 seconds later, the LED flashes quickly, which indicates that the original address code has been cleared. At this time, press all the buttons briefly, and the LED will flash once and then go out.
(2).复制其他遥控器的地址码
(2) . copy the address code of other remote controls
将原配遥控器和学习遥控器靠近,同时按住需要复制的按键和学习型遥控器的一个按键,如果LED灯快速闪烁则说明这个按键的地址码已经学习成功!遥控器上其他3个按键也用同样的方法进行操作。
Close the original remote control to the learning remote control, and press and hold the key to be copied and a key of the learning remote control at the same time. If the LED light flashes quickly, it means that the address code of this key has been learned successfully. The other three keys on the remote control are operated in the same way.
那如果误删除地址码怎么办?这个也是完全不用担心的,只要你同时按下遥控器下方的两个D A按键约2秒后,LED开始快速闪烁,这说明被意外清除的地址码已经被成功复原了。
What if you delete the address code by mistake? You don't have to worry about this. As long as you press the two Da buttons at the bottom of the remote control at the same time for about 2 seconds, the LED starts to flash quickly, which indicates that the address code that was accidentally cleared has been successfully restored.
上一篇:济南车库门总结车库门的各部分的主要功能
下一篇:浅谈济南你卷帘门的应用
产品中心
联系我们