发布人：http://www.kdjlm.com 发布时间：2020-09-02 17:14:05
The application of rolling shutter door in our life is not rare, it can be said that it is very common. Customers who have used the shutter door know that after using for a period of time, the zoom will fall off. Do you know what caused this phenomenon? If you want to know more about it, please see me below! Next, Jinan roller shutter will introduce to you below, hoping to help you.
Jinan roller shutter door
1. The machine should be well lubricated during operation. When the ordinary machine runs for about 5000 hours, the grease should be replenished or replaced. When the bearing is overheated or the lubrication deteriorates during operation, the lubricating grease should be replaced in time.
When replacing the grease, the old lubricating oil should be removed, and the oil groove of the bearing and bearing cover should be cleaned with gasoline, and then fill 1 / 2 of the cavity between the inner and outer rings of the bearing with zl-3 lithium grease
2. When cleaning curtain cloth, wipe with soft cotton cloth, it is easy to scratch the surface by coins. When the stain is too heavy, use detergent, toothpaste, special cleaner, etc. After decontamination, wipe with water, and then dry. The correct cleaning method can keep the fast rolling shutter door as bright as new.
3. Jinan rolling shutter door maintenance reminds that when the rolling shutter door is running, children or articles are not allowed under the door, so as to avoid injury to children or articles in the process of operation.
4. When the thermal protection of the machine operates continuously, it is necessary to find out whether the fault is from the machine or overload or the setting value of the protection device is too low, and it can be put into operation after troubleshooting.
5. Pay attention to the edges and corners do not rub too much, otherwise it will cause the edges and corners to fall off.
6. Observe whether there is abnormal noise during operation. If there is abnormal noise, inform the professional for maintenance.
7. As the door body is always in the tension state of the torsion spring, it is necessary to contact professional personnel for repair and maintenance.
8. Before use, the door must be effectively debugged by professionals before operation.
Jinan rolling shutter door maintenance
To sum up, the above is the Jinan roller shutter door to lead to the corner of the door off the eight reasons. I believe that you will have a more in-depth understanding of these contents after reading. The maintenance of rolling shutter door needs certain technology and skills. It is also recommended that you choose professional maintenance company when repairing rolling shutter door. I hope these contents can help you. If you want to know more details, you can pay more attention to the dynamic of our website: http://www.kdjlm.com