咨询热线
-->
当前位置: 首页 > 新闻中心 > 行业新闻 >

卷帘门正常操作与特殊情况的处理方法

发布人:http://www.kdjlm.com    发布时间:2021-03-08 17:28:54

1,卷帘在上下启闭的时候查看清楚是否有堆物,特别是防火卷帘门是和消防系统联动的,经常会因为操作不当导致防火卷帘门损坏,或倾斜。而普通的电动卷帘门也应该特别注意,门帘在开闭的同时应该人在现场,万一出现门帘倾斜或者轨道卡位应该及时停止门帘开闭,这样才不会给电机和门帘造成更大的伤害。
1. When the shutter is opened and closed up and down, check whether there is a pile of objects, especially the fire shutter door is linked with the fire control system, which often leads to damage or tilt of the fire shutter door due to improper operation. Ordinary electric roller shutter doors should also pay special attention to the fact that people should be at the scene when opening and closing the door curtain. In case of inclination of the door curtain or track jam, the opening and closing of the door curtain should be stopped in time, so as not to cause greater damage to the motor and the door curtain.
2,门帘在开闭的同时,严禁行人及奔跑,因为门帘在开闭的时候门帘是通过联片连接的,而电机和传动轴也是存在极少的不安全因素。所以门帘在启动的时候应该尽量不要有人跑动。
2. When the door curtain is opened and closed, pedestrians and running are strictly prohibited, because the door curtain is connected by connecting pieces when it is opened and closed, and there are few unsafe factors in the motor and transmission shaft. So the curtain should try not to run when it starts.
3,商家在选材方面也应该多考虑,轻便,坚固耐用的材质,这样即使在特殊情况下也能起到较高的安全问题。
3. In terms of material selection, businesses should also consider light, durable materials, so that even in special cases, it can play a higher safety problem.
4,卷帘门电机的选购也是比较重要的一个环节,切记不要感觉提升力够用就行,因为卷帘门电机的承载力会随着时间的推移,会慢慢的降低实际的提升功效,所以选材方面尽量的要超过门帘的实际提升力。
4. The purchase of rolling shutter motor is also an important link. Remember not to feel that the lifting force is enough, because the bearing capacity of rolling shutter motor will slowly reduce the actual lifting effect over time, so the material selection should exceed the actual lifting force of the curtain as far as possible.
5,品牌也是选择一个企业不可或缺的的因素,很多商家会去选择低价位,低品质的私人小作坊来制作,当然确实是降低了成本,但是反正很多小加工场为了降低制作成本,一味的降低配件材质.
5. Brand is also an indispensable factor in choosing an enterprise. Many businesses will choose low-cost, low-quality private small workshops to make products. Of course, it really reduces the cost, but anyway, many small processing factories blindly reduce the material of accessories in order to reduce the production cost
在安装的同时质量上根本没办法得到相应的保障,还有维修也是如此,当客户付清全额货款以后很多生产厂家因为成本计算额超标会选择不给客户维护,这点也是值得客户反思的因素之一。
At the same time, there is no corresponding guarantee for the quality of the installation, and so is the maintenance. When the customer pays in full, many manufacturers will choose not to give the customer maintenance because of the excessive cost calculation, which is also one of the factors worthy of customer reflection.
上一篇:车库门使用范围和适用的方向
下一篇:济南卷帘门的云运行的要求是什么?
产品中心
联系我们