咨询热线
当前位置: 首页 > 新闻中心 > 行业新闻 >

使用济南卷帘门需要知道这些内容

发布人:http://www.kdjlm.com    发布时间:2021-05-06 17:49:22

卷帘门在生活中的应用算是比较广泛的了,为了避免卷帘门没用多久就出现故障,相关人员在运用中要注意使用方法,并做好基本的维护,以免导致门损坏,还要进行更换,增加成本。可能有很多人不是很清楚哪些是正确的使用方法,下面济南卷帘门厂家就详细为大家介绍下具体的内容。
Roller shutter door is widely used in life. In order to avoid the failure of roller shutter door, the relevant personnel should pay attention to the use method and do the basic maintenance, so as not to cause damage to the door, but also to replace and increase the cost. There may be a lot of people are not very clear which is the correct way to use, the following Jinan roller shutter manufacturers will introduce the specific content for you in detail.
济南卷帘门
Jinan rolling shutter door
1、检查供电电压是否稳定,应确保门的正确运行方向。如果不长时间,需要将门抬到上限位置,切断电源,不要让人停在门底部以避免损伤或损坏产品,停电后,按开关以防止突然来电,造成 人员伤害。
1. Check whether the power supply voltage is stable and ensure the correct operation direction of the door. If not for a long time, it is necessary to lift the door to the upper limit position and cut off the power supply. Do not let people stop at the bottom of the door to avoid damaging or damaging the product. After the power failure, press the switch to prevent sudden power call and personal injury.
2、济南卷帘门安装位置的上端需要可靠的防火设施,在门的下端设置制作箱子或吊顶时可拆卸的可动盖,在门机侧的下端确保500×500mm的可拆卸的检查孔,使维护变得容易。
2. The upper end of the installation position of Jinan rolling shutter door needs reliable fire prevention facilities. A removable cover is set at the lower end of the door to make the box or ceiling, and the lower end of the door machine side can ensure the safety × 500mm removable inspection hole makes maintenance easy.
3、所有的电动控制的卷帘门在与开闭箱的指示相同的方向上开闭,特别是在新接通电源进行试运转,或者从外部输入电源进行相线变换时,首先使用手动装置在门孔高度的1/2的位置打开快门,在接通电源后开闭快门,在有指示之前正常地进行开闭否则,会损坏挡块,引起开闭器的倒带和顶起等造成损失。
3. All the electrically controlled rolling shutter doors open and close in the same direction as the indication of the opening and closing box. Especially when the power supply is newly connected for trial operation or the phase line is changed from the external input power supply, the manual device is first used to open the shutter at 1 / 2 of the height of the door opening. After the power supply is connected, the shutter is opened and closed normally before the indication, otherwise, the stop will be damaged, It causes the rewinding and jacking of the shutter, causing losses.
4、当门启动时,操作者站在可以看到门运行状态的位置,否则容易发生意外损坏。
4. When the door is started, the operator should stand at the position where he can see the running state of the door, otherwise it is easy to cause accidental damage.
济南卷帘门
Jinan rolling shutter door
5、济南卷帘门门帘和卷门机不要与酸、碱性物溶液接触,以防腐蚀门帘表面。
5. Jinan rolling door curtain and rolling machine should not contact with acid and alkaline solution to prevent corrosion of the curtain surface.
6、门机在运行、滑行、传动等部位应定期检查(至少每年2次),并根据需要及时加油,以保证卷帘门的正常使用。
6. The operation, sliding, transmission and other parts of the door machine should be inspected regularly (at least twice a year), and timely refueling should be carried out according to the needs, so as to ensure the normal use of the rolling shutter door.
上述一些关于济南卷帘门基本的维护和保养方法,希望能给大家带来一些帮助,另外如果门真的出现了故障,问题不大的话,可以联系卷帘门维修厂家进行处理,从而确保门能继续使用。并在后期做好基本的维护工作,门也能多用几年。
Some of the above about the basic maintenance and maintenance methods of Jinan roller shutter door, I hope to bring you some help, in addition, if the door really has a failure, the problem is not big, you can contact the roller shutter door repair manufacturers to deal with, so as to ensure that the door can continue to use. And do the basic maintenance work in the later stage, the door can also be used for several years.
上一篇:小型车库门定制需要注意的问题
下一篇:卷帘门行业为什么对国民经济具有促进作用
产品中心
联系我们