咨询热线
当前位置: 首页 > 新闻中心 > 行业新闻 >

车库门添加润滑油我们该如何进行做?

发布人:http://www.kdjlm.com    发布时间:2021-09-08 13:46:40

买一瓶锂基润滑脂或车库门润滑油。不要用类似WD-40的通用润滑油,润滑车库门需要用锂基润滑脂。一般在五金店或者淘宝都能买到。当然也有一些专门用来润滑车库门的润滑油。不能用机油。相对于车库门润滑油,机油更容易招灰,并且容易滴落。在使用前,先阅读使用说明,看产品是否适合用在车库门上。
Buy a bottle of lithium grease or garage door oil. Do not use general lubricating oil similar to WD-40. Lithium base grease is required to lubricate garage doors. You can usually buy it in a hardware store or Taobao. Of course, there are some lubricants specially used to lubricate garage doors. Do not use oil. Compared with garage door lubricating oil, the oil is easier to attract dust and drip. Before use, read the instructions to see if the product is suitable for use on the garage door.
打开车库门,然后在每个铰链上都喷上润滑油。轻轻地用手提起车库门,然后在和导轨有接触的铰链上喷上润滑油。这样做可以润滑门上的活动部件,让开门和关门更加顺畅。在每个铰链上喷1-2次,让每一面都喷上润滑油。
Open the garage door and spray lubricating oil on each hinge. Gently lift the garage door by hand, and then spray lubricating oil on the hinge in contact with the guide rail. This can lubricate the moving parts on the door and make the door open and close more smoothly. Spray 1-2 times on each hinge and spray lubricating oil on each side.
济南车库门
润滑滚轮。滚轮是车库门上的活动部件,它固定在铰链上。这些滚轮里面是小的滚珠轴承,只有将它们充分润滑后,开关门的时候才会顺畅。在喷雾罐出口插上细管,然后把润滑油喷到滚轮里面。把流出来的润滑油擦干净,否则车库门会不稳。每个看得见的滚珠轴承都要喷上润滑油,注意尼龙滚轮上不需要喷润滑油。
Lubricate the rollers. The roller is a movable part on the garage door, which is fixed on the hinge. Inside these rollers are small ball bearings. Only after they are fully lubricated can they open and close the door smoothly. Insert a thin tube at the outlet of the spray tank and spray the lubricating oil into the roller. Wipe off the lubricating oil, or the garage door will be unstable. Each visible ball bearing shall be sprayed with lubricating oil. Note that lubricating oil does not need to be sprayed on the nylon roller.
在弹簧和轴承板上也喷上润滑油。弹簧一般位于车库门的顶部,也需要充分润滑。轴承板是弹簧两侧可以活动的圆形部件。在弹簧上喷上润滑油,然后在轴承板的区域也喷上润滑油。之后尝试开门和关门操作,让润滑油涂抹得更均匀。如果弹簧坏掉或者弯曲变形,在润滑前更好换根新弹簧。
The spring and bearing plate are also sprayed with lubricating oil. The spring is usually located on the top of the garage door and also needs to be fully lubricated. The bearing plate is a circular part that can be moved on both sides of the spring. Spray lubricating oil on the spring and then on the central area of the bearing plate. Then try to open and close the door to make the lubricating oil more evenly applied. If the spring is broken or bent, it is best to replace it with a new spring before lubrication.
潜在成本:如果你要升级你的门来增加窗户,改造现有的车库门成本很高,而且你有可能在这个过程中对你的门造成损害。你需要确定更新车库门是否会使它们不平衡。因为当你增加窗户时,门的重量会改变。
Potential cost: if you want to upgrade your door to add windows, it is expensive to transform the existing garage door, and you may damage your door in the process. You need to determine whether updating garage doors will make them unbalanced. Because when you add windows, the weight of the door changes.
给轨道顶部喷上润滑油。轨道是链条滑行地方,会沿着屋顶延伸。轨道顶部是链条滑行时真正接触到的地方,所以也需要喷润滑油。给轨道顶部喷上润滑油,然后用抹布抹匀。链条上带有天然保护剂,所以无需定期润滑。轨道底部不用喷润滑油。
Spray the top of the rail with lubricating oil. The track is where the chain slides and extends along the roof. The top of the track is where the chain really touches when sliding, so it also needs to be sprayed with lubricating oil. Spray lubricating oil on the top of the track, and then wipe it evenly with a rag. There is a natural protective agent on the chain, so there is no need for regular lubrication. There is no need to spray lubricating oil at the bottom of the track.
上一篇:提高车库门的装配精度的要素是什么?
下一篇:车库门滚轮组件的改进优势有哪些?
产品中心
联系我们