咨询热线
当前位置: 首页 > 新闻中心 > 行业新闻 >

车库门故障诊断和修复方式有哪些?

发布人:http://www.kdjlm.com    发布时间:2021-10-06 14:12:54

车库门在运行当中,难免会受到由于安装质量和环境的影响而发生问题,如果不及时修理,可能会小故障变成大故障,从而增加维修成本。
During the operation of the garage door, it is inevitable that problems will occur due to the influence of installation quality and environment. If it is not repaired in time, small faults may become major faults, thus increasing the maintenance cost.
车库门作为我们家中的保证安全的设施一定要受到我们的重视,接下来我们来了解一下在日常生活中如果车库门出现故障我们应该如何诊断和修复以及车库门选择使用经验分享。
As a safe facility in our home, the garage door must be paid attention to. Next, let's learn how to diagnose and repair the garage door if it fails in daily life, and share the experience of choosing and using the garage door.
一、如何诊断和修复车库门故障
1、 How to diagnose and repair garage door fault
1.检查电源
1. Check the power supply
如果车库开门器没有反应,要做的就是检查是否正与电源相连接。可以查看一下电源和车库门的传感器以及墙上的灯,看看它们是否通电。如果没有,拔下插销再插一次,还没有可以去电闸箱检查一下保险开关。
If the garage door opener does not respond, all you have to do is check whether it is connected to the power supply. You can check the power supply and garage door sensors and the lights on the wall to see if they are powered on. If not, unplug the latch and insert it again. If not, you can go to the switch box to check the safety switch.
2.确保没有上锁
2. Make sure it is not locked
可以检查安装在墙上的车库开门按钮,在上面有个绿色的灯,有时这个灯可能在外壳内。如果绿色按钮在闪烁,就证明车库门已经锁上了。在这种情况下,只需按住“锁定”按钮几秒钟,直到绿灯停止闪烁,然后再次尝试打开车库门。
You can check the garage door opening button installed on the wall. There is a green light on it. Sometimes the light may be in the shell. If the green button is flashing, the garage door is locked. In this case, just press and hold the lock button for a few seconds until the green light stops flashing, and then try to open the garage door again.
3.安全传感器
3. Safety sensor
在车库门的下方都会有两个安全传感器,这个传感器的作用是防止车库门在关闭时夹到人或宠物。,如果安全传感器其中一个灯不亮了,传感器可能会认为它探测到了车库门的路径上有物体,所以会导致车库门一直关不上。
There are two safety sensors under the garage door. The function of this sensor is to prevent people or pets from being caught when the garage door is closed., If one of the lights of the safety sensor is not on, the sensor may think that it has detected an object in the path of the garage door, so it will cause the garage door to remain closed.
一般来说,这种情况可能是由于安全传感器被杂物挡住,或是两个传感器的位置有所偏移,没有对齐。接下来,沿着连接传感器的电线一直向上排查,以确保它没有损坏或切断。
Generally speaking, this may be because the safety sensor is blocked by sundries, or the positions of the two sensors are offset and not aligned. Next, check up along the wire connecting the sensor to ensure that it is not damaged or cut off.
4.检查车库门轨道
4. Check the garage door track
车库门两侧的滚轮轨道应该是直的,没有任何障碍物。如果轨道弯曲或堵塞,则在车库门在开启和关闭时会很困难。
The roller tracks on both sides of the garage door should be straight without any obstacles. If the track is bent or blocked, it will be difficult to open and close the garage door.
5.弹簧
5. Spring
如果当开启车库门的时候,车库门只升起3寸左右,然后又自动落下无法完全打开。遇到这种情况,可以检查一下车库门上面的弹簧,看看是否有断裂的情况。按压车库门遥控器的开门键,与此同时手动将车库抬起,直至车库门完全打开
If when opening the garage door, the garage door only rises about 3 inches, and then automatically falls, it can not be fully opened. In this case, you can check the spring on the garage door to see if it is broken. Press the open key of the garage door remote control, and at the same time, manually lift the garage until the garage door is fully opened
上一篇:济南电动卷帘门的开关使用规范有哪些?
下一篇:自动车库门门体材料及五金配件!
产品中心
联系我们